产品服务
All categories
Localtion:
Homepage
/
/
/
YRKK Series High Voltage Wound Rotor Three-Phase Asynchronous Motor

YRKK Series High Voltage Wound Rotor Three-Phase Asynchronous Motor

YRKK Series High Voltage Wound Rotor Three-Phase Asynchronous Motor
产品描述
Parameters

Product Description

YRKK series high-voltage three-phase asynchronous motors have two voltage levels: 6KV and 10KV.
 
The development of this series of motors adopts advanced analysis technology, high-quality materials and scientific processing techniques are used in the manufacture, so that the series motors have the advantages of high efficiency, low noise, low vibration, high reliability, and convenient installation and maintenance.

Model Description (take Yrkk710-4 As An Example)

YRKK—closed wound rotor type three-phase asynchronous motor with air-to-air cooler;
 
710—represents the center height of the motor 710mm;
 
4-represents level 4;

 

Basic Parameters

(1) Rated voltage: 6KV or 10KV (special voltage can be manufactured as required)
 
(2) Rated frequency: 50Hz (60Hz can be manufactured as required)
 
(3) Work system: S1 continuous work
 
(4) Protection level: IP54/IP55
 
(5) Cooling method: IC611/IC616
 
(6) Motor structure type installation method: IMB3
 
(7) Insulation class: Class F

 

Structural Features

This series of motors adopt a box-type appearance, and the frame is welded by steel plates. This makes the motors have the characteristics of good rigidity and light weight. The optimized design of the motor structure also makes the series motors have the advantages of easy installation and maintenance.
 
The stator and rotor punching sheets are punched from low-loss non-oriented cold-rolled silicon steel sheets.
 
The stator adopts an external pressure structure, the stator winding adopts F-class insulating material, and the coil ends are reliably fixed and bound. After the coil ends are connected, they need to undergo an inter-turn pulse voltage test, and adopt the international advanced vacuum pressure impregnation solvent-free paint ( VPI) Process treatment.
 
The wound rotor is made of pure copper and adopts Class F insulation material. And after the dynamic balance check, so the motor runs smoothly and reliably.
 
The bearing adopts two structural forms: rolling bearing and sliding bearing, depending on the power of the motor, the mining industry and the speed.
Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table

Related products

Contact us

+86-24-86009926-8005

 

Mobile phone:

13909815299

Address: No.24, Kaifa No.24 Road, Shenyang Economic and Technological Development Zone

E-mail: sales@cnsmotor.com

手机官网

Mobile website

公众号二维码

official account

Copyright cnsmotor.cn All rights reserved     Powered by:300.cn    Shenyang    辽ICP备15012743号