YME2 Series Low Tension High Power Three-Phase Asynchronous Motor
◆ Site Conditions
YME2 series motors can be applied to most occasions and environments. The standard working condition of the motor is -20℃ to +40℃, and the altitude is 1000 meters.
◆ Temperature Rise And Insulation
The motor is designed in accordance with Class F insulation (105K), which improves the service life and reliability of the motor.
◆ Cooling And Ventilation
According to the regulations of IC411 in IEC60034-6, the standard cooling method is totally enclosed self-fan cooling (TEFC). The standard motor is equipped with an auxiliary flow plastic fan.
◆ Protection Level
The protection level of the motor is IP54 (IP55 can also be made according to requirements), and it can be used in dusty or humid environments. A motor with a higher degree of protection can also be provided.
◆ Motor Protection
PTC, PT100 and other winding and bearing temperature measurement and protection devices can be installed according to requirements.
◆ Voltage Frequency
The standard motor is 380V/50Hz, and a 50Hz or 60Hz motor with any voltage in the range of 380-660V can also be designed. It can still operate well when the supply voltage deviates from the rated voltage by ±5%.
The vibration speed level of the YME2 series motor measured at no load meets the N (standard) level.
◆ Junction Box Location
The junction box is a standard YME2 series motor on the top of the base.
Address: No.24, Kaifa No.24 Road, Shenyang Economic and Technological Development Zone